Installer for RAD 10.2 Tokyo

Have a Raize Components question that does not fit into any of the forums below? Post it here.

Installer for RAD 10.2 Tokyo

Postby GoEk » Wed Mar 22, 2017 5:20 pm

Hi Ray,
installer for RAD 10.2 Tokyo? How does it work nowadays?

Regards
Goran
Last edited by GoEk on Sat Apr 01, 2017 7:48 am, edited 3 times in total.
GoEk
 
Posts: 40
Joined:
Tue Apr 12, 2011 7:26 am
Location: Sweden

Re: Installer for RAD 10.2 Tokyo

Postby Norm@Home » Wed Mar 22, 2017 11:03 pm

I'd like to know that too, I installed 10.2 Tokyo today and since getting the Konopka VCL Controls as a bonus with my last maintenance subscription purchase I've made good use of them and I can't use 10.2 until I can get them installed.

Thanks!
Norm@Home
 
Posts: 8
Joined:
Wed Mar 15, 2017 5:16 pm

Re: Installer for RAD 10.2 Tokyo

Postby Raize Support » Thu Mar 23, 2017 12:23 am

Hi,

Embarcadero will be announcing details on KSVC and Radiant Shapes for Tokyo in the next few days.

Ray
Raize Software Support
Raize Software
http://www.raize.com
Raize Support
 
Posts: 612
Joined:
Fri Mar 25, 2011 9:04 pm

Re: Installer for RAD 10.2 Tokyo

Postby Norm@Home » Mon Mar 27, 2017 8:51 pm

Now appears to be available from the GetIt Package Manager for 10.2, actually it just downloaded the old 6.2.2 installer and the installer still does not show 10.2 as an option.
Norm@Home
 
Posts: 8
Joined:
Wed Mar 15, 2017 5:16 pm

Re: Installer for RAD 10.2 Tokyo

Postby GoEk » Thu Mar 30, 2017 11:36 am

Norm@Home wrote:Now appears to be available from the GetIt Package Manager for 10.2, actually it just downloaded the old 6.2.2 installer and the installer still does not show 10.2 as an option.


The GetIt installer for Raize in 10.2 is for 10.2 only, I ran it and Raize is now available in Tokyo so it seems to work.

UPDATE:

Ray,
I finally tracked the problem down to an issue where Tokyo had default include and library paths to
both 10.2 Tokyo and 10.1 Berlin which probably resulted in linking from the wrong version. This must have been done by some installer because I have not touched it.

How does it work with having 6.2.2 and 6.2.3 installed at the same time? I see they install to the same directory.
GoEk
 
Posts: 40
Joined:
Tue Apr 12, 2011 7:26 am
Location: Sweden

Re: Installer for RAD 10.2 Tokyo

Postby Raize Support » Fri Mar 31, 2017 1:50 pm

The 6.2.3 installer adds the Lib\RX10.2 directory to the 6.2.2 (or any earlier 6.x installation). The new installer does not know anything about Berlin and only adds paths for Tokyo. The old paths could have gotten into RAD Studio 10.2 is if you manually tried to load the Berlin design packages into Tokyo.

Technically, you could use the !Build_RC6.cmd file in the Source directory to rebuild the components and packages for other versions of Delphi.

Ray
Raize Software Support
Raize Software
http://www.raize.com
Raize Support
 
Posts: 612
Joined:
Fri Mar 25, 2011 9:04 pm

Re: Installer for RAD 10.2 Tokyo

Postby GoEk » Sat Apr 01, 2017 7:48 am

Raize Support wrote:The 6.2.3 installer adds the Lib\RX10.2 directory to the 6.2.2 (or any earlier 6.x installation)...


I stand corrected, doing it on my laptop that is how it works.

Raize Support wrote:The new installer does not know anything about Berlin and only adds paths for Tokyo. The old paths could have gotten into RAD Studio 10.2 is if you manually tried to load the Berlin design packages into Tokyo.


It may have been included when I used the migration tool for Tokyo now that I think of it.

Raize Support wrote:Technically, you could use the !Build_RC6.cmd file in the Source directory to rebuild the components and packages for other versions of Delphi.


So I can update to 6.2.3. for the earlier RAD version using that? Is there any changes to 6.2.3 other than Tokyo support?
GoEk
 
Posts: 40
Joined:
Tue Apr 12, 2011 7:26 am
Location: Sweden

Re: Installer for RAD 10.2 Tokyo

Postby Raize Support » Sun Apr 02, 2017 12:50 am

Ah yes, the migration tool would do that.

There are no substantial changes between 6.2.2 and 6.2.3 but there were quite a few minor modifications to the source code to handle a variety of new compiler hints and warnings that were introduced in Tokyo.

Ray
Raize Software Support
Raize Software
http://www.raize.com
Raize Support
 
Posts: 612
Joined:
Fri Mar 25, 2011 9:04 pm

Re: Installer for RAD 10.2 Tokyo

Postby marcelogauna » Tue May 30, 2017 7:09 am

How I get the 6.2.3 installer ?
marcelogauna
 
Posts: 2
Joined:
Fri May 26, 2017 1:56 pm

Re: Installer for RAD 10.2 Tokyo

Postby David Marcus » Tue May 30, 2017 9:09 am

Use the GetIt Package Manager in the IDE.
David Marcus
 
Posts: 69
Joined:
Thu Aug 11, 2011 11:29 pm
Location: Somerville, MA, USA

Next

Return to General

Who is online

Users browsing this forum: No registered users and 3 guests